MSA Fall Arrest: A Guide to Choosing and Using Fall Protection Safely

rbwmsafety4all.org.uk  > msa >  MSA Fall Arrest: A Guide to Choosing and Using Fall Protection Safely
msa fall arrest
0 Comments

MSA Fall Arrest: Choosing and Using a System Safely

Working at height can expose people to serious risk, so selecting and using suitable fall protection is essential. MSA fall arrest equipment is designed to help protect workers when a fall cannot be prevented. However, equipment alone is not enough: a safe system also depends on careful planning, correct fitting, training, inspection and a suitable rescue plan.

What is a fall arrest system?

A fall arrest system is designed to stop a person after a fall has begun and limit the forces on their body. A typical personal system may include a full-body harness, a connecting device such as a lanyard or self-retracting lifeline, and a suitable anchor point. The exact equipment required depends on the task, the working environment and the distance available below the worker.

Fall arrest is different from fall restraint. Restraint equipment aims to prevent a worker from reaching a position where they could fall. Where practical, preventing access to the edge is generally preferable to arresting a fall.

Components of MSA fall arrest equipment

  • Full-body harness: Worn and adjusted to fit the user, with the correct attachment point for the intended application.
  • Connecting device: A compatible lanyard, energy absorber or self-retracting lifeline that links the harness to the anchor.
  • Anchor point: A secure point or anchorage system capable of supporting the loads involved and positioned appropriately for the work.
  • Compatible connectors: Hooks and other connectors must be suitable for the equipment and anchor, and must be closed and locked as intended.

MSA offers a range of fall protection products, but not every component is suitable for every job. Always check the manufacturer’s instructions and confirm that the complete system is compatible.

How to choose the right system

Before selecting equipment, assess the work and its surroundings. Consider the height, the possibility of a swing fall, sharp or abrasive edges, weather, nearby machinery and whether the worker could strike an obstruction during a fall. The available clearance beneath the work area is particularly important: a system may require more distance to deploy than the space available.

Choose equipment that suits the task and the user, and make sure the anchor is appropriate for the intended direction and forces. If there is any uncertainty about system design or anchor suitability, seek advice from a competent person or the equipment manufacturer.

Using fall arrest equipment

Workers should be trained to inspect, fit and use their equipment before going to height. A harness must be adjusted correctly, with straps arranged and fastened according to the instructions. Connectors should be attached only to the designated points, and the system should be configured to minimise fall distance and avoid contact with edges where possible.

Equipment should be checked before each use. Look for damage, wear, contamination, missing labels, corrosion, stitching problems or any other sign that could affect performance. Do not use equipment if its condition is uncertain. Follow the manufacturer’s requirements for formal inspections, record-keeping, storage and service life. Equipment that has arrested a fall should be taken out of use and dealt with in accordance with the manufacturer’s guidance.

Plan for rescue

Stopping a fall is only part of the safety plan. A worker left suspended in a harness may need prompt assistance, so a rescue plan should be prepared before work begins. It should identify the rescue method, equipment, trained personnel and how emergency services will be contacted. Relying solely on an emergency call-out may not be an adequate plan for every situation.

UK requirements and good practice

In the UK, work at height must be planned, supervised and carried out by competent people, with risks assessed and suitable equipment selected. Employers should follow applicable health and safety legislation and relevant product standards, as well as the manufacturer’s instructions. Requirements can vary by equipment type and application, so confirm that the chosen products are appropriate for the work.

Safer work at height starts with planning

MSA fall arrest equipment can form part of an effective work-at-height system when it is correctly selected, compatible, maintained and used by trained workers. Assess the task first, prioritise preventing falls where possible, check equipment before use and make sure a practical rescue plan is in place. These steps help ensure that fall protection supports a wider, well-managed approach to safety.

 

5 Essential Safety Tips for Using MSA Fall-Arrest Equipment

  1. Use MSA fall-arrest equipment only if trained and authorised.
  2. Inspect the harness, lanyard and connectors before every use.
  3. Check that all components are compatible and correctly fitted.
  4. Use a suitable anchor point and confirm there is enough fall clearance.
  5. Have a rescue plan in place before starting work at height.

Use MSA fall-arrest equipment only if trained and authorised.

Use MSA fall-arrest equipment only if you have received the appropriate training and are authorised to use it. Training helps you select compatible equipment, fit and adjust a harness correctly, check for damage and connect to a suitable anchor point. If you are unsure how to use any part of the system, stop work and ask a competent person for guidance.

Inspect the harness, lanyard and connectors before every use.

Inspect your MSA fall arrest harness, lanyard and connectors before every use. Check for cuts, fraying, damaged stitching, corrosion, deformation and any signs of wear or contamination, and make sure buckles and connectors operate and lock correctly. If any part is damaged, has arrested a fall or you are unsure of its condition, do not use it; remove it from service and follow the manufacturer’s guidance. Pre-use checks complement, but do not replace, inspections carried out at the intervals required by the manufacturer and a competent person.

Check that all components are compatible and correctly fitted.

Before starting work at height, check that every part of your MSA fall arrest system is compatible and correctly fitted. Make sure the harness is adjusted securely, connectors are fastened and locked, and the lanyard or lifeline is suitable for the harness, anchor point and task. Always follow the manufacturer’s instructions, and do not use equipment if you are unsure whether it is safe.

Use a suitable anchor point and confirm there is enough fall clearance.

Choose an anchor point that is suitable for the task, correctly positioned and approved for use with your fall arrest system. Before work begins, calculate the required fall clearance, taking account of the connecting device, energy absorber deployment, the worker’s height and any potential swing fall. Check that there is enough unobstructed space below to prevent the worker striking the ground or another surface if a fall occurs.

Have a rescue plan in place before starting work at height.

Before starting work at height, make sure a clear, practical rescue plan is in place. If someone falls and is left suspended in a harness, they may need prompt assistance, so identify how they will be rescued, who is responsible, what equipment is needed and how to contact emergency services. Brief everyone involved and check that the plan can be carried out safely using the resources available on site.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit exceeded. Please complete the captcha once again.